7 Crucial Tips When Designing The Kitchen

It's the place with the heaviest oil smoke in the kitchen. The kitchen that is inconvenient to use and difficult to clean makes people don't want to cook. The same is to buy cabinets, some can remain as good as new for ten years, and some will crack and become old in a few years, mainly due to the neglect of key details.

1. Countertop bearing process should be reliable

When dealing with food, hard food like bones is a great test of whether the countertop is strong enough or not. When choosing and installing countertops, we should consider the load-bearing.

2. Pay attention to the cabinet sink area

The load-bearing requirements of the base cabinets in the sink area are relatively high, especially for the design of the basin under the countertop, and the selection of cabinets needs both pressure resistance and moisture resistance. At the same time, the surface can be treated with aluminum foil, which can isolate water vapor and has a certain moisture-proof effect.

3. Choose high quality hardware

Hardware connect cabinet door and carcass, and the cabinet door opens and closes more than ten times a day, so hardware is very important.

You can open and close the hinge several times to check the smoothness; You can hold the cabinet door down and check the bearing capacity of the hinge; Look at the electroplated layer on the surface to see if it is smooth or not. Damped hinges do not pinch hands and are very practical in daily use.

4. Stable wall cabinet hanger

If the wall cabinet is not installed stable, it is easy to fall off. A standard wall cabinet has two hardware hanging parts fixing points, which are distributed on the left and right side plates of the cabinet. Some cabinets use invisible hanging codes for aesthetics, and the hooks are installed behind the wall cabinets. If the depth into the wall is not enough, it is very likely that the wall cabinets will fall.

5. Deliberation open cabinet and shelf

Many people choose to make open wall cabinets and open shelves, including iron shelves, wooden partitions, metal partitions and other shelves. But at the same time, these open wall cabinets and shelf will increase your cleaning capacity.

6. Wall cabinet top to the ceiling

The wall cabinet top to the ceiling design eliminates the gap between the wall cabinet and the ceiling, leaving no sanitary corner, making it look cleaner and more storage space.

With lifting baskets in the wall cabinet, a lot of unused space can be solved, and the use height can be flexibly adjusted with you. Even the top items can be close at hand.

7. Make more drawers

REBON suggested that cabinets should be made with fewer partitions. This structure seems to be very cost-effective, but the space utilization rate is low. Make more drawers, the storage space can be basically used. Divided drawers with different shades, dishes, tableware and even pots can be put in.The storage space and efficiency can be improved by at least 50%.